D2700 with P411 mix SAS and SATA
I have a D2700 populated with 14 SAS hard drives on a P411 controller. I would like to know if I can add 3 SATA SSDs to the mix P.S. This thread has been moved from General to Disk Array. - Hp Forum...
View ArticleSNMP trap to diferent port than 162
Hello, I´m trying to set an snmp trap destination to a diferent port than 162/udp (snmp default) but I cant found how I can do it. Could be possible to set? the customer are requesting that. thanks in...
View ArticleD2700 Implementation - is it straightforward?
Hello all I am about to add a D2700 with a HP222A SAS controller into a file server that's a DL380p gen8 (Windows 2008 R2) to increase the amount of direct storage available on the machine. Does anyone...
View Articlehow to monitor mds 600 disk array
We have rack mounted c7000 G2 Bladecenters. Attached to the bladecenter are two MDS 600 external disk arrays. We can monitor the bladecenter, blades and disks inside the mds600 with a combination...
View ArticleP212 and D2600
Hello. Does anyone know any known issues connecting a Disk enclosure hp D2600 to a array controler p212zm? For what i read about it they should work together but i keep geting this message:...
View Articleva 7410 question
We seem to have lost a drive. The drive in slot 11 shows as missing. Rebuild shows as failed. StorageWorks Command View on the status tab has the following in warning states: Redundancy Loss,...
View Article776 (Ready for Recovery) and 785 (Parity initial. in progress) on two logical...
Hi, We have : Smart Array P600 Controller In RAID 5 configuration, one disk had malfunction - ADU predicted that disk will fail, so we replaced that disk. Rebuld was started ok, and reached 90%, but...
View ArticleHP 212 aray zm and HP D2600 disk enclosure
Hello. Could anyone tell me if it is necessary to have a memory cache module on the array p212 to conect to the hp d2600 disk enclosure? Thank's
View ArticleHP MDS 600 Issues! Cache Problem & Logical Drive Missing
I am having two issues. 1.The controller cannot be configured. CACHE STATUS PROBLEM DETECTED:...…The cache on this controller has a problem. To prevent data loss, configuration changes to this...
View ArticleHP D6000 Disk array questions
Hi All, I have two questions about the D6000 1) What is the actual speed of the SAS and SATA drives connected to the D6000 sas expander ? 2) Is the D6000 compatible with g6/g7 blades running the p700m...
View ArticleHelp with RAID status/drive failure on DL 360 G7 with Storageworks D2600...
Hi all, Inherited a server running VMWare (standard build not HP) and I've got a drive with a amber failure light in the Storageworks array. Given it's running VMWare O/S there is no ACU and iLo 3...
View ArticleD2700 compatible 1.2TB drive
Is this part number for a 1.2TB 2.5 SAS Hard Drive compatible with the D2700 Storage Enclosure, if so great, if not which part number do I need? 718162 - B21HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC...
View ArticleMoving a D6000 from one server to another
Hi, We have a D6000 currently connected to a g7 and will be moving it to a g8 Will moving it destroy the raids and arrays or will it simply present the same volumes etc to the new server? ThanksG
View ArticleD2600 connect to separate Windows 2008 servers
Is it possible to move D2600 (single or cascaded) disk array from one server to another, each containing a SmartArray P812 controller? Or better yet, connect the D2600 to both servers simultaneously....
View ArticleExtending an array across 2 controllers?
Hi, I have a 4 disk RAID1/0 array on my internal P410i controller, and have recently attached a StorageWorks via a P420. The StorageWorks has 8 disks in it which I would like to extend the existing...
View ArticleNeed help setting up an A3312A Jamacia enclosure
Salutations, This is my first post on this forum so if this thread is in the wrong section please inform me. Here is the scenario currently I am attempting to set up the A3312A enclosure. I need a...
View ArticleError messages at syslog.log related to disk
Hi, Many error messages in my server running hp-ux 11.11 related to writing to disk. Sep 29 08:50:00 prod4 vmunix: Synchronous Page I/O error occurred while paging to/from diskSep 29 08:50:00 prod4...
View ArticleMoving D2600 from one server to another
Hello everyone, We recently tried to move our D2700 DAS StorageWorks from a ProLiant DL380 G5 to a ProLiant DL380p G8 without much success. Instead of having one raid disk, we had all of the disks...
View ArticleHP Smart Array P410 in HP EliteDesk 800 G1 SFF, card not found in Device Manager
Hi Everyone, I have recently purchased a HP P410 card and a HP EliteDesk 800 G1 SFF machine that i am setting up as a home server. I have plugged the card in and been able to configure the RAID array...
View ArticleReplace 3Par with Direct Attached Storage
Hello,so one of our partners suggested us to order a new 3Par SAN for our VMWare infrastructure and HDD based backupDatacenter A- HP 3Par 7200c 56x 900GB SAS 10k SFF 36x 2TB 7.2k LFF 8x 1.92 B cMLC SSD...
View Article